About

 
 

AVIAN VERSUS PRO FORK 

ABOUT

The Versus Pro fork steerer tube is made of 4mm thick 7005 aluminum. It features a M10 thread internal locking system to eliminate expander plugs & star nuts that often compromise fork strength. The aero carbon fiber legs are made of highly durable Toray fiber, and the alloy drop-outs are available in your choice of 10mm or 20mm. This fork has a 1-1/8” steerer to accommodate frames that do not have a tapered head-tube.  

SPEC

  •  4mm thick 7005 steerer tube

  • Toray carbon fiber legs

  • Internal locking system

  • 170mm steerer tube length

  • 303mm axle-to-crown

  • 32mm drop-out offset

  • 10mm & 20mm

  • availableMatte Black or Gloss Black options

  • 18.45oz (with stem-lock & top cap)

     

The Versus Pro Carbon Fork is compatible with BMX racing frames that do not have a tapered head-tube. Although with the right bearing race, this fork is compatible with a tapered head tube, it is highly suggested that you would use our Versus Tapered fork model.

Important Torque Spec Info:

Please use a torque wrench when installing this fork onto the bike. The fork’s integrated locking system has an alloy bolt/head, so if it’s over-tightened then you will strip it. Tighten between 4-5Nm is fine, but do not exceed 5.5Nm.